Study on multi-size seed-metering device for vertical plate soybean precision planter
Keywords:
precision planter, seed-metering device, soybean seed, hole size, EDEM simulation, planter plate series, optimizationAbstract
Aiming to solve the problem of small range of the appropriately sowing seeds existing in a vertical disc seed-metering device, the planter plate series with four sizes were developed according to the variety and size distribution of all soybeans in China. The structure and working principle of the vertical disc soybean seed-metering device were detailed, and the influence of the diameter of soybean on the working performance of the seed-metering device was analyzed through the software EDEM virtual simulation, so as to achieve the goal of covering the soybean seeds with all sizes by the minimum planter plate series as well as to obtain the most appropriate operating speed of each planter plate by optimization. For the planter plates with the hole diameter of 7, 9, 12, 16 mm, the appropriate size ranges of sowing seeds are 4.5-6.0, 6.0-8.0, 8.0-10.5, 10.5-13.0 mm, respectively, and the appropriate operating speeds are 9, 8, 7, 6 km/h, respectively. The results show that this planter plate series can meet the requirements of seeding with all sizes of soybeans at the range of the most appropriate operating speed. The study method can provide a reference for design and optimization of precision planters. DOI: 10.3965/j.ijabe.20150801.001 Citation: Liu H X, Guo L F, Fu L L, Tang S F. Study on multi-size seed-metering device for vertical plate soybean precision planter. Int J Agric & Biol Eng, 2015; 8(1): 1-8.References
[1] Liu H X. Study on key parts and holistic device of the soybean dense and flat sowing machine. Beijing: China Agriculture Press, 2007; 29–149. (in Chinese)
[2] Liu H X, Wang F L, Yang G L. New vertical composite plate soybean precision seed-metering device. Transactions of the CSAE, 2007; 23(10): 112–116. (in Chinese)
[3] Richard L Parish. Development of a narrow-row vertical-plate planter. Transactions of the ASAE, 1972; 15(4): 636–637.
[4] Liu H X. Experimental study on optimizing structural parameters of 2B-JP-FL01 seed-metering device. Transactions of the CSAE, 2007; 23(9): 106–110. (in Chinese)
[5] Zhang Q F, Geng D Y, Li D, Xia L M, Dong Y B. Study on seed-cell filling of the cell structure’s size of the horizontal cone frustum type precision meter. Journal of Agricultural Mechanization Research, 2011; 11: 143–147. (in Chinese)
[6] Yu J M, Holland J B, McMullen M D, Buckler E S. Genetic design and statistical power of nested association mapping in maize. Genetics, 2008, 178: 539–550.
[7] Zhao K Y, Aranzana M J, Kim S, Lister C, Shindo C, Tang C L, et al. An arabidopsis example of association mapping in structured samples. PloS Geneties, 2007; 3(1): 0071–0082.
[8] Liu Y H, Guan R X, Liu Z X, Ma Y S, Wang L X, Li L H, et al. Genetie structure and diversity of cultivated soybean (Glycine max L. Merr,) landraces in China. Theor. Appl. Genet., 2008; 117(6): 857–871.
[9] Jun T H, Van K, Kim M Y, Lee S H, Walker D R. Association analysis using SSR markers to find QTL for seed protein content in soybean. Euphytica, 2008; 162(2): 179–191.
[10] Liu X F. Association analysis for seed shape traits and 100-seed weight in soybean. Master's thesis, Nanjing Agricultural University, 2010. (in Chinese)
[11] Deshapande S D, Bal S, Ojha T P. Physical properties of soybean. Journal of Agricultural Engineering Research, 1993; 56: 89–98.
[12] Wang F L, Shang J J, Liu H X, Guo L F. Application of EDEM particles simulation technology on seed-metering device research. Journal of Northeast Agricultural University, 2013; 44(2): 110–114.
[13] Navid H, Ebrahimian S, Gassemzadeh H R, Mousavinia M J. Laboratory evaluation of seed metering device using image processing method. Australian Journal of Agricultural Engineering (AJAE), 2011; 2(1): 1–4.
[14] Anantachar M, Prasanna G, Kumar V, Guruswamy T. Neural network prediction of performance parameters of an inclined plate seed metering device and its reverse mapping for the determination of optimum design and operational parameters. Computers and Electronics in Agriculture, 2010; 72: 87–98.
[15] Deng X Y, Li X, Shu C X, Huang H D, Liao Q X. Mathematical model and optimization of structure and operating parameters of pneumatic precision metering device for rapeseed. Journal of Food, Agriculture & Environment, 2010; 8(3/4): 318–322.
[16] Vu-Quoc L, Zhang X, Walton O R. A 3-D discrete-element method for dry granular flows of ellipsoidal particles. Computer Methods in Applied Mechanics and Engineering, 2000; 187: 483–528.
[17] Boac J M, Casada M E, Maghirang R G, Harner III J P. Material and interaction properties of selected grains and oilseeds for modeling discrete particles. Transactions of the ASABE, 2010; 53(4): 1201–1216.
[2] Liu H X, Wang F L, Yang G L. New vertical composite plate soybean precision seed-metering device. Transactions of the CSAE, 2007; 23(10): 112–116. (in Chinese)
[3] Richard L Parish. Development of a narrow-row vertical-plate planter. Transactions of the ASAE, 1972; 15(4): 636–637.
[4] Liu H X. Experimental study on optimizing structural parameters of 2B-JP-FL01 seed-metering device. Transactions of the CSAE, 2007; 23(9): 106–110. (in Chinese)
[5] Zhang Q F, Geng D Y, Li D, Xia L M, Dong Y B. Study on seed-cell filling of the cell structure’s size of the horizontal cone frustum type precision meter. Journal of Agricultural Mechanization Research, 2011; 11: 143–147. (in Chinese)
[6] Yu J M, Holland J B, McMullen M D, Buckler E S. Genetic design and statistical power of nested association mapping in maize. Genetics, 2008, 178: 539–550.
[7] Zhao K Y, Aranzana M J, Kim S, Lister C, Shindo C, Tang C L, et al. An arabidopsis example of association mapping in structured samples. PloS Geneties, 2007; 3(1): 0071–0082.
[8] Liu Y H, Guan R X, Liu Z X, Ma Y S, Wang L X, Li L H, et al. Genetie structure and diversity of cultivated soybean (Glycine max L. Merr,) landraces in China. Theor. Appl. Genet., 2008; 117(6): 857–871.
[9] Jun T H, Van K, Kim M Y, Lee S H, Walker D R. Association analysis using SSR markers to find QTL for seed protein content in soybean. Euphytica, 2008; 162(2): 179–191.
[10] Liu X F. Association analysis for seed shape traits and 100-seed weight in soybean. Master's thesis, Nanjing Agricultural University, 2010. (in Chinese)
[11] Deshapande S D, Bal S, Ojha T P. Physical properties of soybean. Journal of Agricultural Engineering Research, 1993; 56: 89–98.
[12] Wang F L, Shang J J, Liu H X, Guo L F. Application of EDEM particles simulation technology on seed-metering device research. Journal of Northeast Agricultural University, 2013; 44(2): 110–114.
[13] Navid H, Ebrahimian S, Gassemzadeh H R, Mousavinia M J. Laboratory evaluation of seed metering device using image processing method. Australian Journal of Agricultural Engineering (AJAE), 2011; 2(1): 1–4.
[14] Anantachar M, Prasanna G, Kumar V, Guruswamy T. Neural network prediction of performance parameters of an inclined plate seed metering device and its reverse mapping for the determination of optimum design and operational parameters. Computers and Electronics in Agriculture, 2010; 72: 87–98.
[15] Deng X Y, Li X, Shu C X, Huang H D, Liao Q X. Mathematical model and optimization of structure and operating parameters of pneumatic precision metering device for rapeseed. Journal of Food, Agriculture & Environment, 2010; 8(3/4): 318–322.
[16] Vu-Quoc L, Zhang X, Walton O R. A 3-D discrete-element method for dry granular flows of ellipsoidal particles. Computer Methods in Applied Mechanics and Engineering, 2000; 187: 483–528.
[17] Boac J M, Casada M E, Maghirang R G, Harner III J P. Material and interaction properties of selected grains and oilseeds for modeling discrete particles. Transactions of the ASABE, 2010; 53(4): 1201–1216.
Downloads
Published
2015-02-28
How to Cite
Hongxin, L., Lifeng, G., Lulu, F., & Shifa, T. (2015). Study on multi-size seed-metering device for vertical plate soybean precision planter. International Journal of Agricultural and Biological Engineering, 8(1), 1–8. Retrieved from https://ijabe.migration.pkpps03.publicknowledgeproject.org/index.php/ijabe/article/view/925
Issue
Section
Power and Machinery Systems
License
IJABE is an international peer reviewed open access journal, adopting Creative Commons Copyright Notices as follows.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
