Mechanical model for double side self-propelled rolling machine based on rigid and flexible contact dynamics

Authors

  • Yiming Li 1. College of Engineering, Shenyang Agricultural University, Shenyang 110866, China; 3. Key Laboratory of Protected Horticulture, Shenyang Agricultural University, Ministry of Education, Shenyang 110866, China; 4. National & Local Joint Engineering Research Center of Northern Horticultural Facilities Design & Application Technology (Liaoning), Shenyang 110866, China
  • Yu Liu 2. College of Horticulture, Shenyang Agricultural University, Shenyang 110866, China; 3. Key Laboratory of Protected Horticulture, Shenyang Agricultural University, Ministry of Education, Shenyang 110866, China; 4. National & Local Joint Engineering Research Center of Northern Horticultural Facilities Design & Application Technology (Liaoning), Shenyang 110866, China
  • Xiang Yue 1. College of Engineering, Shenyang Agricultural University, Shenyang 110866, China; 3. Key Laboratory of Protected Horticulture, Shenyang Agricultural University, Ministry of Education, Shenyang 110866, China; 4. National & Local Joint Engineering Research Center of Northern Horticultural Facilities Design & Application Technology (Liaoning), Shenyang 110866, China
  • Zhongqiu Li 2. College of Horticulture, Shenyang Agricultural University, Shenyang 110866, China; 3. Key Laboratory of Protected Horticulture, Shenyang Agricultural University, Ministry of Education, Shenyang 110866, China; 4. National & Local Joint Engineering Research Center of Northern Horticultural Facilities Design & Application Technology (Liaoning), Shenyang 110866, China
  • Xingan Liu 2. College of Horticulture, Shenyang Agricultural University, Shenyang 110866, China; 3. Key Laboratory of Protected Horticulture, Shenyang Agricultural University, Ministry of Education, Shenyang 110866, China; 4. National & Local Joint Engineering Research Center of Northern Horticultural Facilities Design & Application Technology (Liaoning), Shenyang 110866, China
  • Tianlai Li 2. College of Horticulture, Shenyang Agricultural University, Shenyang 110866, China; 3. Key Laboratory of Protected Horticulture, Shenyang Agricultural University, Ministry of Education, Shenyang 110866, China; 4. National & Local Joint Engineering Research Center of Northern Horticultural Facilities Design & Application Technology (Liaoning), Shenyang 110866, China

Keywords:

contact dynamics, solar greenhouse, self-propelled rolling machine, mechanical model

Abstract

The objective of the present research was to establish a mechanical model to study the performance of double side self-propelled rolling machine. There are two key models in the modeling process. The first model is the soft cover dynamics model, which is an important innovation in this study. And the insulation quilt was established based on the Macro-modeling technology. The second model is the double side self-propelled rolling machine virtual prototype model. By specifying multiple contact constraints and loadings between the soft cover dynamics model and the rigid component, the virtual prototype model was built successfully and the double side self-propelled rolling process was completely simulated. Moreover, the interaction mechanisms of the rigid and flexible coupling mechanics were investigated. The virtual rolling processes of different insulation quilt lengths were analyzed under different thickness treatments. The simulated results showed a good agreement with the experiment measurements, which suggested that the established model is an effective approach to evaluate and optimize the rolling machine. The successful establishment of the mechanical model can facilitate the study of the performance of the product and further optimization, and also is of great significance to shorten the development cycle and reduce costs. Keywords: contact dynamics, solar greenhouse, self-propelled rolling machine, mechanical model DOI: 10.25165/j.ijabe.20221506.6485 Citation: Li Y M, Liu Y, Yue X, Li Z Q, Liu X A, Li T L. Mechanical model for double side self-propelled rolling machine based on rigid and flexible contact dynamics. Int J Agric & Biol Eng, 2022; 15(6): 38–43.

References

[1] Zhang G X, Fu Z T, Zhang L X, Yan J, Zhang B, Li X X. Development status and trend of mechanical curtain technology in solar greenhouse in China. Transaction of the CSAE, 2017; 33(Z1): 1–10. (in Chinese)
[2] Wang X. Research on key positioning technology of solar energy saving greenhouse curtain roller. Agricultural Product Processing, 2016; 1: 41–43, 46. (in Chinese)
[3] Wang Y, Liu L, Hou J L, Wei M, Wang X F. Development of intelligent solar greenhouse curtain roller. Shandong Agricultural Science, 2014; 46(5): 21–25. (in Chinese)
[4] Gu J H. Study on the role of curtain roller in facility agriculture. Agricultural Science-Technology and Information, 2017; 12: 45–46. (in Chinese)
[5] Liu M G, Wang Y H, Ye Q N. Application research of curtain rolling machine in Liaoning facility agriculture. Agricultural Science& Technology and Equipment, 2012; 4: 66–67. (in Chinese)
[6] Ding X M. Research and development on exterior cover-rolling machine of solar greenhouse in China. Journal of Agricultural Mechanization Research, 2011; 33(12): 217–222. (in Chinese)
[7] Zhang S Q. Causes and preventive measures of running deviation of curtain roller in solar greenhouse. Farm Machinery, 2019; 2: 95–97. (in Chinese)
[8] Cui Y X, Zhao L, Zhao H F, Pan D F, Yang R. Research on current situation and development of control technology of solar greenhouse shutter machine. Agricultural Technology and Equipment, 2019; 4: 50–51. (in Chinese)
[9] Zhang G X, Fu Z T, Li X X, Yan J, Yang H, Zhang L X. Design and experiment of the rear fixed type rolling shutter device in solar greenhouse. Transaction of the CSAM, 2016; 47(12): 299–308. (in Chinese)
[10] Yuan Y W, Ma Y J, Yi J G, Kong D G, Liu J T, Li S S. Development of seamless curtain rolling machine for solar greenhouse. Journal of Agricultural Mechanization Research, 2017; 39(6): 140–144. (in Chinese)
[11] Yin J J, Gao Q, Chen Y M. Research on virtual knotting method of knotting machine based on rigid and flexible contact dynamics. Transactions of the CSAM, 2016; 47(9): 85–92. (in Chinese)
[12] Ma X F. Modeling and simulation based on ADAMS for elevator wire rope system. Journal of Hunan Institute of Engineering (Natural Science Edition), 2016; 26(3): 32–36. (in Chinese)
[13] Yuan J J, Wang J T, Guo W J. Study on modeling of material conveying machinery based on ADAMS macro programs. Equipment Manufacturing Technology, 2018; 10: 140–144. (in Chinese)
[14] Du Z X, Liu M D. Study on modeling the cable system of bridge tower testing machine based on ADAMS macro programs. Machine Design and Research, 2013; 29(6): 140–143. (in Chinese)
[15] Pu M H, Wu Jiang. Study on multi-body dynamics model of chain drive based on ADAMS. Mechanical Design and Research, 2008; 24(2): 57–59. (in Chinese)
[16] Li Z J, Song S Y. Modeling and simulation of roll film based on ADAMS. Journal of Wuhan University of Light Industry, 2014; 33(4): 54–57, 67. (in Chinese)
[17] Li Z J, Song S Y. Roll film modeling and dynamics simulation based on ANSYS. Packaging Engineering, 2015; 36(7): 31–35. (in Chinese)
[18] Shi M Q. Research on multi-contact problem based on ADAMS. Computer Engineering and Application, 2004; 29: 220–222. (in Chinese)
[19] Shi M Q, Zhang P, Fan S Q, Liu Q. Computational efficiency for dynamic simulation based on multi-contact mechanical system. Journal of Mechanical Engineering, 2010; 46(7): 108–113. (in Chinese)
[20] Fang X F, Wu H T, Liu Y P, Lu Y P, Wang T Y. Calculation of multi-body system dynamics modeling based on the theory of spatial operator algebra. Journal of Mechanical Engineering, 2009; 45(1): 228–234. (in Chinese)
[21] Mocera F, Nicolini A. Multibody simulation of a small size farming tracked vehicle. Procedia Structural Integrity, 2018; 8: 118–125.
[22] Klisch T. Contact mechanics in multibody systems. Mechanism and Machine Theory, 1999; 34(5): 665–675.
[23] Zhang G X, Liu X X, Fu Z T, Stankovski S, Dong Y H, Li X X. Precise measurements and control of the position of the rolling shutter and rolling film in a solar greenhouse. Journal of Cleaner Production, 2019; 228: 645–657.
[24] Meng X Z, Li S L. Theoretical analysis of work load of solar greenhouse curtain roller. Mechanization of Rural Pastoral Areas, 2009; 4: 13–17. (in Chinese)
[25] Sun H, Teng G H, Zhang X F, He G R. Design and test on real-time measurement system of mat roller workload for sunlight greenhouse. Transaction of the CSAE, 2014; 30(1): 138–145. (in Chinese)

Downloads

Published

2022-12-27

How to Cite

Li, Y., Liu, Y., Yue, X., Li, Z., Liu, X., & Li, T. (2022). Mechanical model for double side self-propelled rolling machine based on rigid and flexible contact dynamics. International Journal of Agricultural and Biological Engineering, 15(6), 38–43. Retrieved from https://ijabe.migration.pkpps03.publicknowledgeproject.org/index.php/ijabe/article/view/6485

Issue

Vol. 15 No. 6 (2022): IJABE

Section

Animal, Plant and Facility Systems

License

IJABE is an international peer reviewed open access journal, adopting Creative Commons Copyright Notices as follows.


Authors who publish with this journal agree to the following terms:


  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).