Field test and cost analysis of four harvesting options for herbaceous biomass handling
Keywords:
harvesting machinery system, herbaceous biomass, field, costAbstract
Abstract: The nature of most biomass materials is a low bulk density as compared to traditional fuel sources. ?High handling cost could be a limiting factor in utilizing biomass feedstock. ?Understanding available harvesting machinery systems and associated costs is critical to future implementation.? Four popular harvesting machinery systems were studied and costs were analyzed based on field measurements and calculations. ?These four systems included (1) round baling and round bale handling systems, (2) large square baling and square bale handling systems, (3) forage harvester and trucking systems, and (4) large square baling plus square bale compression systems. ?Results indicated that a self-loading forage wagon can reduce the cost to harvest a crop but requires more harvest time.? Large square bales were found to reduce cost of handling and transport as compared to round bales.? Further research is needed to determine storage costs and deterioration loss of the two bale types.? Compressed square bales were found to reduce storage, handling and transport costs.? Compressed bale machinery has a high initial cost, which currently makes only valuable for hay export.
Keywords: harvesting machinery system, herbaceous biomass, field, cost
DOI: 10.3965/j.issn.1934-6344.2011.03.058-068
?
Citation: Douglas Brownell, Jude Liu. ?Field test and cost analysis of four harvesting options for herbaceous biomass handling. ?Int J Agric & Biol Eng, 2011; 4(3): 58
Downloads
Published
How to Cite
Issue
Section
License
IJABE is an international peer reviewed open access journal, adopting Creative Commons Copyright Notices as follows.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).