Recognition of Fill Walnuts and Empty Walnuts Using Acoustic Signal Processing
Abstract
An intelligent walnut recognition system combining acoustic emissions analysis, decision tree and fuzzy inference system (FIS) was developed and tested. In data acquisition part, Fast Fourier Transform (FFT) of impact signals was measured. Feature extracted in two ways: Using time domain and FFT of impact signal. 66% of samples used for training and remaining samples used for testing. In selection feature part, most important feature selected that were: average and second frequency amplitude of FFT. The method is based on feature generation by Fast Fourier Transform (FFT) and time domain, produce decision tree with J48 algorithm and classification by fuzzy rules. The output of J48 algorithm was employed to produce the crisp if-then rule and MF (membership function) sets. The structure of FIS classifier was then defined based on the crisp sets. The results showed that the total classification accuracy were 94.68%. The results indicate that the proposed FFT-J48-FIS model can be used in separation fill walnuts from empty walnuts.
Downloads
Published
2012-09-30
How to Cite
khalifa, smail, tousi, behrouz, & Komarizadeh, M. H. (2012). Recognition of Fill Walnuts and Empty Walnuts Using Acoustic Signal Processing. International Journal of Agricultural and Biological Engineering, 5(3). Retrieved from https://ijabe.migration.pkpps03.publicknowledgeproject.org/index.php/ijabe/article/view/387
Issue
Section
Information Technology, Sensors and Control Systems
License
IJABE is an international peer reviewed open access journal, adopting Creative Commons Copyright Notices as follows.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
